Sapim "Race Butted" Spoke (Without Nipple)
-
Weight : 0.01kg / 0.02lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 34166
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Sapim "Race Butted" Spoke (Without Nipple)
is Sapim's most widely used butted spoke. At 1.8 mm in the middle it sits between the light Laser and the strong Strong, which makes it the obvious choice for most wheels. This version has the classic bent head (J-bend) and fits all hubs with a conventional spoke hole.
Sapim is a Belgian spoke manufacturer, and this spoke is made of stainless steel. Its middle section has a tensile strength of 1370 N/mm², and the manufacturer lists it in lengths from 131 - 340 mm.
Notes:
1. The right length: spoke length follows from rim, hub and lacing pattern, so the figures below are guide values only.
- BMX 20 inch (406 mm), 3 cross: typically approx. 186 mm front and approx. 184 mm rear
- BMX Race 20 inch (451 mm): rather approx. 200 to 205 mm
- BMX 18 inch: typically approx. 156 to 164 mm
- BMX 16 inch: typically approx. 132 to 140 mm
- 12 and 14 inch: no manufacturer publishes reliable figures for these, please ask us
- 22, 24, 26 and 29 inch as well as MTB: this depends so much on rim and hub that we would rather work it out
Tell us the rim, the hub and the lacing pattern and we will work the length out for you. It is quick and far better than a wheel worth of the wrong length.
On the pattern: BMX rims from 18 inch up are almost always drilled for 3 cross. Smaller wheels are usually laced 2 cross or 1 cross, and at the front sometimes radially. Disc brake wheels should be laced at least 2 cross, and many manufacturers exclude radially laced hubs from their warranty.
2. The right quantity: this spoke is sold individually, so please adjust the quantity in your cart. A BMX wheel usually has 36 holes, an MTB wheel usually 32, and newer MTB wheels often 28 at the front and 32 at the rear. Small kids wheels often have only 16, 20 or 28 holes. 2 to 3 spare spokes are always a good idea.
3. Do not forget the nipples: this spoke ships without a nipple. Please order the matching nipples at the same time.
You will find Sapim's official data sheet with all dimensions as the last image in the gallery.
Sapim is a Belgian spoke manufacturer, and this spoke is made of stainless steel. Its middle section has a tensile strength of 1370 N/mm², and the manufacturer lists it in lengths from 131 - 340 mm.
Notes:
1. The right length: spoke length follows from rim, hub and lacing pattern, so the figures below are guide values only.
- BMX 20 inch (406 mm), 3 cross: typically approx. 186 mm front and approx. 184 mm rear
- BMX Race 20 inch (451 mm): rather approx. 200 to 205 mm
- BMX 18 inch: typically approx. 156 to 164 mm
- BMX 16 inch: typically approx. 132 to 140 mm
- 12 and 14 inch: no manufacturer publishes reliable figures for these, please ask us
- 22, 24, 26 and 29 inch as well as MTB: this depends so much on rim and hub that we would rather work it out
Tell us the rim, the hub and the lacing pattern and we will work the length out for you. It is quick and far better than a wheel worth of the wrong length.
On the pattern: BMX rims from 18 inch up are almost always drilled for 3 cross. Smaller wheels are usually laced 2 cross or 1 cross, and at the front sometimes radially. Disc brake wheels should be laced at least 2 cross, and many manufacturers exclude radially laced hubs from their warranty.
2. The right quantity: this spoke is sold individually, so please adjust the quantity in your cart. A BMX wheel usually has 36 holes, an MTB wheel usually 32, and newer MTB wheels often 28 at the front and 32 at the rear. Small kids wheels often have only 16, 20 or 28 holes. 2 to 3 spare spokes are always a good idea.
3. Do not forget the nipples: this spoke ships without a nipple. Please order the matching nipples at the same time.
You will find Sapim's official data sheet with all dimensions as the last image in the gallery.
Facts: Sapim "Race Butted" Spoke (Without Nipple)
- Contents: 1 spoke, without nipple
- Type: double butted
- Dimensions: 2.0 - 1.8 - 2.0 mm
- Gauge: 14G
- Material: stainless steel
- Spoke head: J-bend (bent head)
- Lengths: 148mm, 150mm, 152mm, 154mm, 156mm, 158mm, 160mm, 162mm, 164mm, 166mm, 170mm, 172mm, 174mm, 176mm, 178mm, 180mm, 182mm, 184mm, 186mm, 188mm, 190mm, 192mm, 194mm, 196mm, 198mm, 200mm, 202mm, 204mm, 206mm, 208mm, 210mm, 212mm, 214mm, 216mm, 218mm, 220mm, 222mm, 224mm, 226mm, 228mm, 230mm, 232mm, 234mm, 236mm, 238mm, 240mm, 242mm, 244mm, 246mm, 248mm, 250mm, 252mm, 254mm, 256mm, 258mm, 260mm, 262mm, 264mm, 266mm, 268mm, 270mm, 272mm, 274mm, 276mm, 278mm, 280mm, 281mm, 282mm, 284mm, 286mm, 288mm, 290mm, 292mm, 294mm, 296mm, 298mm, 300mm, 302mm, 304mm, 306mm or 308mm
- Middle strength: 1370 N/mm²
- Nipple: Not included (please order separately)
- Weight: approx. 5.7 grams at a length of 260mm (manufacturer: 363 g per 64 pieces)
- Field of use: MTB, BMX, downhill, road
- Manufacturer data sheet: data sheet in the image gallery
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
