EN

Signature "Entra 35" MTB Riser Handlebar - Ø35mm

from 115.95 EUR

Color | Height
  • Please Select
Unavailable options

These product options are currently unavailable. Should they come back in, we can let you know!

Color | Height
Add it on and save (optional)
  • Weight : 0.32kg / 0.71lbs
  • Packaging Unit: 1 Piece
  • Product ID (PID): 44941
  • Product safety

Product safety

Manufacturer
Signature Bikes Inc.
Kanada
[email protected]
https://signature.bike
EU responsible person
TRAFFIC GmbH
Richard-Byrd-Str. 12
50829 Cologne
Germany
[email protected]

Information pursuant to the EU General Product Safety Regulation (GPSR).

Report a product error

Spotted an error in the product data? Let us know, we'll check your report. If the error is confirmed you'll receive a 5 EUR voucher as a thank you (max. 1 voucher per week and customer, applies to the first confirmed report of an error).

We only use your email address to get back to you about this report and to send the voucher.

The Signature "Entra 35" MTB Riser Handlebar - Ø35mm is Signature's alloy bar. It is hydroformed from 7050-T6 aluminium, pressed into a precision mould under extreme pressure, which gives it an exact shape and the distinctive Tri-Face profile in the rise section. The clamp area is only 70mm wide on the 35mm clamp, which lets the bar flex a little vertically and softens the ride through rough terrain. The extended control zone leaves room for modern brake and lever setups, and markings in 5mm steps help you cut it from 800mm down to 710mm. The Signature "Entra 35" MTB Riser Handlebar - Ø35mm comes in 28mm and 42mm rise and is tested to EFBE Tri-Test category 5, gravity rated.

Facts: Signature "Entra 35" MTB Riser Handlebar - Ø35mm

  • Material: Aluminum
  • Bar-Design: 1-piece
  • Geometry:
    - Width: 31.5"
    - Backsweep: 8°
    - Upsweep: 5°
    - Height: 28mm or 42mm
  • Clamping: 35mm
  • Contains: 1 piece
  • Recommended for: freeride, downhill, dirt jump
  • Extras:
    - 7050-T6 aluminium, hydroformed
    - 800mm wide, cuttable to 710mm, markings in 5mm steps
    - 70mm clamp width, not compatible with stems wider than 70mm
    - EFBE Tri-Test category 5, gravity rated
    - weight 313g (28mm rise), 322g (42mm rise)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.

Fits To

MTB Parts - Sale

MTB Parts - Newest Products

Displayed prices are taxfree to United States (USA), plus shipping. Struck-through prices (discounts) in accordance with the recommended retail prices.