Spank "359 Vibrocore" MTB Rear Wheel - 27.5" Inch
-
Weight : 1.15kg / 2.54lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33242
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Spank "359 Vibrocore" MTB Rear Wheel - 27.5" Inch is the 27.5 inch rear wheel built around the Spank 359 Vibrocore rim. It measures 30.5mm inside at a profile height of 19mm, which pairs radial compliance for traction with high lateral stiffness. The Vibrocore foam core inside the rim damps vibration, adds torsional stiffness and extends the fatigue life of the rim. BeadBite bead hooks keep the tyre seated even at low pressure, and tubeless tape and valve are fitted at the factory. It is laced 3-cross onto a Spank hub with the HEX Drive freehub, whose 102 points of engagement and six pawls pick up after 3.5 degrees. The brake rotor mounts on the 6-bolt interface.
Facts: Spank "359 Vibrocore" MTB Rear Wheel - 27.5" Inch
- Wheel Size: 27.5"
- Version: 12 x 148 mm Boost / 6-bolt / Shimano HG
- Rim: Spank 359 Vibrocore, aluminium, sleeved, symmetrical profile
- Rim Width: 30.5mm inner, 35mm outer
- Rim Height: 19mm
- Holes: 32H
- Valve Hole: for Presta valve
- Hub: Spank HEX J-Type, HEX Drive with 102 P.O.E., 3.5 degree engagement, 6 pawls
- Hub Bearings: sealed (SB)
- Spokes: J-bend, triple-butted 2.2/1.8/2.0
- Spoke Nipples: brass, external
- Lacing: 3-cross
- Disc Mount: 6-bolt
- Build: handbuilt to A-Class specification
- Scope of Delivery: 1 wheel, tubeless tape and valve fitted
- Extras:
- Vibrocore foam core inside the rim
- tubeless ready
- BeadBite bead hooks against burping
- OohBah inverted inner wall
- ETRTO 584x30.5
- ERD 560mm++ (Spank measures without the nipple head, add twice the nipple head height)
- recommended tyre width 2.0" to 2.6"
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
