Stan's NoTubes "Original" Tubeless Rim Tape - 10m
-
Weight : 0.08kg / 0.18lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 35143
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Stan's NoTubes "Original" Tubeless Rim Tape - 10m seals the rim bed for tubeless use. The material is non-porous and keeps moisture away from rim, spokes and nipples, and the adhesive peels off without residue at the next tyre change. One 10 metre roll covers four 29 inch or five 27.5 inch rims.
Facts: Stan's NoTubes "Original" Tubeless Rim Tape - 10m
- Width: 25mm, 36mm or 27mm
- Compatibility: tubeless ready rims in alloy and carbon
- Scope of Delivery: 1 roll of 10 m, enough for 4 rims in 29 inch or 5 rims in 27.5 inch
- Extras:
- choose a tape 1 to 2 mm wider than the internal rim width
- non-porous, keeps moisture away from rim, spokes and nipples
- adhesive leaves no residue
- low friction surface helps the tyre bead slip into place
- use two layers above 3.5 bar
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
