Teravail "Fluent Carbon" MTB Rim - 29" - Rear
- Weight : 0.45kg / 0.99lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43433
- Product safety
- Note carbon rim notice
Weight
Source: BMX Glossary
The Teravail "Fluent Carbon" MTB Rim - 29" - Rear is Teravail's carbon mountain bike rim: light and lively, but built to hold up to trail riding and bikepacking. Hookless with an extra-thick flange, a reinforced spoke bed and drilling optimised for the rear wheel for better spoke bracing angles.
30 mm internal width, 36 mm external width, 25 mm deep, ERD 591.5 mm, for tires from 50 to 71 mm. Teravail backs it with a lifetime warranty for the original owner.
Facts: Teravail "Fluent Carbon" MTB Rim - 29" - Rear
- Wheel Size: 29"
- Material: carbon
- Holes: 32H
- Width: 30 mm internal, 36 mm external
- Height (Rim Wall): 25 mm
- Rim flanges: hookless
- ERD: 591.5 mm
- Contains: 1 rim
- Extras:
- rear rim, drilling optimised for the rear wheel
- disc brake only
- tubeless ready, one layer of 33 mm Teravail tubeless tape recommended
- tire width 50 to 71 mm
- reinforced spoke bed, extra-thick flange
- tested to ASTM category 3
- lifetime warranty for the original owner per Teravail
- weight 450 g (Teravail)
Carbon rim notice
On carbon rims, single layers of the laminate can crack, usually from hard landings or overloading. Such damage from use is not a defect: it is covered neither by the statutory warranty nor by any manufacturer's warranty. A rim with cracked layers should be checked before it is ridden again.
Our recommendation: carbon rims are best suited to experienced, professional use. Front wheel rather than rear, and park, dirt or race rather than street. Land clean and you keep the weight advantage for longer. Worth being aware of.
