Topeak "E-Booster Digital" Electric Pump
-
Weight : 0.16kg / 0.35lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 38514
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Topeak "E-Booster Digital" Electric Pump inflates from a battery instead of your arm: preset the pressure on the backlit display, put the head on the valve, press the button - the pump shuts off at the set figure, up to 8 bar within 2 psi. 13.5 litres per minute are good for around four fills of a 29 x 2.4" tyre per charge, says Topeak. The SmartHead takes Presta and Schrader without changing anything.
Facts: Topeak "E-Booster Digital" Electric Pump
- Max. Pressure: 8 bar (120 psi)
- Preset Pressure: Yes, with auto stop
- Display: digital, backlit, 2 psi tolerance
- Battery: 7.4 V / 600 mAh, around 45 min to charge
- Charging Port: USB-C (5 V / 1.5 A)
- Valve Fitting: Presta, Schrader, Topeak TurboFlow, Clik Valve (SmartHead)
- Material: Aluminum or Plastic
- Extras: 13.5 litres per minute, auto off, 5.9 x 3.5 x 8.6 cm, 162 g
- Scope of Delivery: 1 electric pump, 1 extension hose, 1 carry pouch, 1 waterproof zip pouch
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
