Unior "689.1/5" Expandable Collet for Inner Bearing Puller 689/5BI - silver - 30-36mm
- Weight : 0.53kg / 1.17lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 40305
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/unior-68915-expandable-collet-for-inner-bearing-puller-6895bi-p-40305?options={1}84{7}4986
Printed: 10/20/2026
Printed: 10/20/2026
The Unior "689.1/5" Expandable Collet for Inner Bearing Puller 689/5BI is a single collet of the 689/5BI inner bearing puller: it goes into the bearing, is expanded by the screw, grips behind the inner race and is knocked out with the sliding hammer. To replace or complete the set, one inner diameter range per size; all collets with M12 thread for the sliding hammer.
Facts: Unior "689.1/5" Expandable Collet for Inner Bearing Puller 689/5BI
- Contains: 1 collet
- 6,5-8mm: length 54mm, wrench size 11/14, 38g
- 10-12mm: length 56mm, wrench size 11/14, 53g
- 22-28mm: length 90mm, wrench size 17, 269g
- 30-36mm: length 100mm, wrench size 22, 525g
Material:
Compatibility: Unior inner bearing puller 689/5BI, bearings with the matching inner diameter
Extras: M12 thread for the sliding hammer
