Wolf Tooth "1x" Chainring Bolt Set - 5 pcs - purple
- Weight : 0.01kg / 0.02lbs
- Packaging Unit: 1 Set
- Product ID (PID): 39446
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Wolf Tooth "1x" Chainring Bolt Set - 5 pcs are the Wolf Tooth bolts for single chainrings with plain through holes and no threaded standoffs: 6 mm long, M8 x 0.75, bolt and nut from 7075-T6 aluminium, 5 pieces for a chainring with 5 holes, 13 g per set. The nut takes a 6 mm hex and the bolt a 4 mm hex, so no spanner is needed. They fit the bolt-on Wolf Tooth Drop-Stop chainrings and single chainrings from other brands. Tighten to 7 to 8 Nm with a little grease on the thread. Made in the USA.
Facts: Wolf Tooth "1x" Chainring Bolt Set - 5 pcs
- Content: 5 bolts, 5 nuts
- Material: 7075-T6 aluminium, anodised
- Extras:
- M8 x 0.75, 6 mm long, for single chainrings with plain through holes and no threaded standoffs
- 4 mm hex on the bolt, 6 mm hex on the nut, no spanner needed
- fits bolt-on Wolf Tooth Drop-Stop chainrings and 1x chainrings from other brands
- torque 7-8 Nm with a little grease on the thread
- weight 13 g per set (manufacturer)
- made in the USA
