Wolf Tooth "Locked-In" MTB Bar Ends
- Weight : 0.09kg / 0.2lbs
- Packaging Unit: Pair
- Product ID (PID): 43937
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Wolf Tooth "Locked-In" MTB Bar Ends are bar ends with a firm, ergonomic rubber outboard flange, developed with World Cup downhill racer Joe Breeden: the side of the hand braces against the flange, so the hand can hold the grip more lightly. That gives more control at speed in technical terrain, less fatigue and arm pump, and protects the little finger. They clamp inside the bar with an expanding wedge and need a grip with an open end; the grip moves slightly inboard for them.
Facts: Wolf Tooth "Locked-In" MTB Bar Ends
- Material: Rubber/Aluminium (80A rubber, 6061-T6 aluminium)
- Handlebar inner diameter: 18.0 mm or more, aluminium and carbon bars
- Barend-Type: screw-in with expanding wedge, 4 mm hex key, 3 Nm
- Contains: 1 pair of bar ends
- Extra:
- dimensions 101.6 x 76.2 x 38.1 mm
- only with open end grips; grips with outboard clamps are not recommended
- not for Hope 35R Carbon; Deity Speedway Carbon and Chromag BZA Carbon only uncut (internal step)
- re-check the bolt periodically, the rubber settles
- weight 93 g per pair (manufacturer)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
