Wolf Tooth "Resolve" Dropper Seatpost - 30.9mm
-
Weight : 0.54kg / 1.19lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40264
- Product safety
The Wolf Tooth "Resolve" Dropper Seatpost - 30.9mm is the first generation Wolf Tooth dropper post, here in 30.9 mm with 200 mm travel and 523 mm overall length, for frames with internal cable routing. The cartridge bleeds itself when fully bottomed out, travel can be reduced with spacers, and the 32 mm stack (extended length minus travel) fits a lot of travel into little frame. Cable, housing and cable barrel are in the box; the remote lever is not, Wolf Tooth recommends the ReMote Pro. Service needs the XZN-16 tool. Rider weight up to 120 kg, also on e-bikes with a conventional dropper mount.
Facts: Wolf Tooth "Resolve" Dropper Seatpost - 30.9mm
- Seatsystem: Rail
- Diameter: 30.9mm
- Travel: 200mm, reducible with spacers
- Actuation: cable, internal routing; remote lever sold separately (manufacturer recommends ReMote Pro)
- Weight: 544 g post only (manufacturer)
- Scope of Delivery: 1 dropper post, cable and housing, cable barrel; no remote, no XZN-16 tool
- Extras:
- first generation (rev1), successor is the Resolve rev2
- overall length 523 mm, stack 32 mm (extended length minus travel)
- minimum insertion marked on the lower tube (90-140 mm depending on travel), follow the frame maker's minimum
- self-bleeding cartridge: the post must bottom out fully, no travel limiters like the Valais
- saddle rail clamp bolts 6 Nm, seatpost clamp 4 Nm max
- rider weight limit 120 kg









