Wolf Tooth "Resolve rev2" Dropper Seatpost - 31.6mm
- Weight : 0.62kg / 1.37lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 39540
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/wolf-tooth-resolve-rev2-dropper-seatpost-316mm-p-39540
Printed: 11/06/2026
Printed: 11/06/2026
The Wolf Tooth "Resolve rev2" Dropper Seatpost - 31.6mm is the second generation Wolf Tooth dropper post with 160, 200 or 242 mm of travel, for frames with internal routing and a 31.6 mm seat tube. The cartridge self-bleeds when the post fully bottoms out, travel can be reduced with spacers, and the 32 mm stack (extended length minus travel) fits a lot of drop into a small frame. The post ships with cable, housing and cable barrel; the remote lever is not included, Wolf Tooth recommends the ReMote Pro or ReMote 360. Service requires an XZN-16 tool. Rider weight up to 120 kg, also on ebikes with a conventional dropper mount.
Facts: Wolf Tooth "Resolve rev2" Dropper Seatpost - 31.6mm
- Seatsystem: Rail
- Material: aluminium (manufacturer)
- Diameter: 31.6mm
- Travel: 160mm, 200mm or 242mm, reducible with spacers
- Actuation: cable, internal routing; remote lever sold separately (manufacturer recommends ReMote Pro or ReMote 360)
- Weight: post only 511 g (160 mm), 564 g (200 mm), 621 g (242 mm) (manufacturer)
- Scope of Delivery: 1 dropper post, cable and housing, cable barrel; no remote, no XZN-16 tool
- Extras:
- overall length 443 mm (160 mm travel), 523 mm (200 mm travel), 607 mm (242 mm travel), stack 32 mm (extended length minus travel)
- minimum insertion marked on the lower tube (90-182 mm depending on travel), follow the frame maker's minimum
- self-bleeding cartridge: the post must bottom out fully, no travel limiters like the Valais
- saddle rail clamp bolts 6 Nm, seatpost clamp 4 Nm max
- rider weight limit 120 kg
- service with the XZN-16 tool, service kits from the manufacturer
