Cane Creek "Kitsuma Air" MTB Rear Shock
- Weight : 0.59kg / 1.30lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 46135
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/cane-creek-kitsuma-air-mtb-rear-shock-p-46135
Printed: 11/04/2026
Printed: 11/04/2026
The Cane Creek "Kitsuma Air" MTB Rear Shock is Cane Creek's gravity focused air shock for enduro and downhill bikes with 150 mm rear travel or more. The Kitsuma line has the highest oil volume of the whole shock family, which keeps it controlled and consistent on long, rough descents. All four damping circuits are adjusted by hand without tools and without counting clicks, and the high volume air can stays sensitive and offers tunable progression.
Facts: Cane Creek "Kitsuma Air" MTB Rear Shock
- Eye-to-Eye x Stroke: 250 x 70 mm, 250 x 72.5 mm, 185 x 52.5 mm (Trunnion), 185 x 55 mm (Trunnion), 205 x 60 mm (Trunnion), 205 x 65 mm (Trunnion), 210 x 50 mm, 210 x 52.5 mm, 225 x 72.5 mm (Trunnion) or 225 x 75 mm (Trunnion)
- Spring: Air, tool-free volume reduction to tune progression
- Damping: Twin tube, Motorex 4wt damper oil, high- and low-speed compression, high- and low-speed rebound, tool-free, Climb Switch
- Mounting: Standard or trunnion, see version
- Hardware: Not included (Cane Creek sells mounting hardware per frame as a separate product)
- Weight: approx. 585 g (varies by size, manufacturer)
- Contains: 1 shock
- Extras: for 150 mm rear travel or more; damper shaft 9.5 mm, solid steel; hand built and individually dyno tested in Fletcher (NC, USA); 2 year warranty
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
