CEMA "BB86-BB92 Interlock" BMX Race Bottom Bracket - 30mm (FSA386 / Rotor)
-
Weight : 0.12kg / 0.26lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 35829
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The CEMA "BB86-BB92 Interlock" BMX Race Bottom Bracket - 30mm (FSA386 / Rotor) is a press fit bottom bracket for frames with a BB86 or BB92 shell (41 mm inner diameter, 86.5 to 92 mm wide) and FSA 386 / Rotor (30 mm) cranks. With the Interlock system both cups are screwed together through the sleeve, which prevents creaking in the press fit shell and stiffens the unit. The bearings come in chrome steel or SRC ceramic, with aluminium dust covers.
Facts: CEMA "BB86-BB92 Interlock" BMX Race Bottom Bracket - 30mm (FSA386 / Rotor)
- Style: BB86 / BB92, press fit, Interlock
- Outside diameter: 41 mm (frame inner diameter)
- Shell Width: 86.5 - 92 mm
- Axle Diameter: 30mm
- Crank type: FSA 386 / Rotor (30 mm)
- Bearings: 2 x cartridge bearings, bearing type per variant: Ceramic or Steel
- Extras:
- Interlock: both cups are screwed together through the sleeve, against creaking in the press fit shell and for more rigidity
- aluminium dust covers
- active seals: seal discs can be removed for re-greasing
- double O-ring against water entering the frame - Content: 1 bottom bracket
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
