Cult "Crew" BMX Crank
-
Weight : 0.88kg / 1.94lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 12631
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Cult "Crew" BMX Crank
is a well elaborated crank from Cult. For saving weight it has hollow flush mount spindle bolts and a hollow spindle. For best stability the
Cult "Crew" BMX Crank
is made in America out of full heat treated 4130 CrMo. Also it is RHD and LHD compatible.
Facts: Cult "Crew" BMX Crank
- Material Crank Arms: 4130 CrMo, heat treated
- Material Crank Spindle: 4130 CrMo, heat treated, hollow
- Crank-Type: 3-piece
- Crank Arm Length: 160mm, 165mm, 170mm or 175mm
- Spindle Diameter: 19mm
- Spindle-Type: 48-Spline
- possible Sprocket Mount by:
Bolt-Drive (25T or larger): right (RHD) and left (LHD)
Spline-Drive: right (RHD) and left (LHD) - Pedal Threat: for 9/16" pedals
- Spindle Bolt: 2x bolts (10x1mm) with 6mm allen key
- Sprocket Bolt: 1x bolt (10x1.5mm)(Standard)
- Extras: completely surround welded axle and pedal jacks,
- Recommended for: Street, Park or Trails
