EN
us

Wolf Tooth "Waveform Large" MTB Pedals

195.95 EUR

Color
  • Please Select
Unavailable options

These product options are currently unavailable. Should they come back in, we can let you know!

Color
or
Straight to the checkout with PayPal. The amount (incl. shipping) is only reserved and charged only when you order. Vouchers & discount codes can then be redeemed in the checkout.
pick up in our shop?
Simply order online, choose as delivery method Pickup and pick up after receiving the pick-up confirmation.
  • Weight : 0.38kg / 0.84lbs
  • Packaging Unit: Pair
  • Product ID (PID): 36505
  • Product safety

Product safety

Manufacturer
Wolf Tooth Components
3100 West Park Drive, Burnsville, MN 55306, USA
[email protected]; https://www.wolftoothcomponents.com
EU responsible person
Cosmic Sports GmbH
Leyher Str.47
90763 Fürth
[email protected]

Information pursuant to the EU General Product Safety Regulation (GPSR).

Report a product error

Spotted an error in the product data? Let us know, we'll check your report. If the error is confirmed you'll receive a 5 EUR voucher as a thank you (max. 1 voucher per week and customer, applies to the first confirmed report of an error).

We only use your email address to get back to you about this report and to send the voucher.

Wolf Tooth "Waveform Large" MTB Pedals is a slim aluminium platform pedal for everything from XC trails to downhill. The platform is dual concave, 14mm thick at the edge and 12.5mm in the centre, eleven stainless steel pins per side load from the rear and hold the shoe. The wave machined into the inside front edge gives the pedal its name. Inside run three sealed cartridge bearings and an igus bushing behind a radial seal, machined and assembled in Minnesota. Large measures 112 x 106mm, see the Waveform Small for the smaller version.

Facts: Wolf Tooth "Waveform Large" MTB Pedals

  • Material:
    - Pedal Body: 6061-T6 aluminium
    - Axle: 17-4 PH stainless steel
    - Pins: 304 stainless steel
  • Thread Size: 9/16" x 20 tpi
  • Bearing: three sealed cartridge bearings and one igus bushing per pedal, radial seal against water and dirt
  • Extras:
    - 11 pins per side (4.5mm, rear loading), 6 spare pins included
    - dual concave, 14mm at the edge, 12.5mm in the centre
    - tapered leading edge to deflect strikes
    - spare parts and service guide from the manufacturer (Right to Repair), 5 year warranty
  • Width: 106mm
  • Length: 112mm
  • Height: 14mm
  • Scope of Delivery: 1 pair of pedals, 6 spare pins
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.

Further Product Versions

Recently Viewed Products

BMX Drivetrain + Co. - Sale

Displayed prices are taxfree to United States (USA), plus shipping. Struck-through prices (discounts) in accordance with the recommended retail prices.