eclat "Cortex FC" 2019 Freecoaster
-
Weight : 0.7kg / 1.54lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 15907
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
eclat "Cortex FC" 2019 Freecoaster
comes with a fresh new design and includes already tow hubguards for driver and non-driver side.
This
eclat "Cortex FC" 2019 Freecoaster
comes with some updates like 3 point internals and stopper ring on bearing and was tested by eclat team riders. The driver is equipped with two sealed bearings and an additional polymer bushing and the clutch runs on a specially developed IOS-System by a into the clutch inserted spring and O-ring resistance mechanism accurately and without wear on the shaft. The
gap of this
eclat "Cortex FC" 2019 Freecoaster
coincides with an almost 3/4 idle rotation deliberately very large but can be set individually by adding the supplied gap rings after removing the driver the axle and the non-drive side bearing.
Facts: eclat "Cortex FC" 2019 Freecoaster
- Material:
- Shell: 6061-T6 aluminum, 36H
- Axle: 14mm Male, CrMo, heat treated, hollow with 6mm allen key insert
- Nuts: CrMo, 17mm wrench or nut
- Cone: CrMo - Driver: LHD 9T or RHD 9T
- Bearing: 2 x sealed bearings, 1 x polymer bushing
