Elevn Technologies "V2 8.0" BMX Race Fork - 20 Inch - 10mm
- Weight : 0.82kg / 1.81lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 45455
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/elevn-technologies-v2-80-bmx-race-fork-20-inch-10mm-p-45455
Printed: 10/29/2026
Printed: 10/29/2026
The Elevn Technologies "V2 8.0" BMX Race Fork - 20 Inch - 10mm is the reinforced Elevn chromoly fork for 20" pro frames with a straight 1-1/8" head tube, made for riders over 80kg. It is built from heat treated 4130 chromoly, the steerer has variable wall thickness, the dropouts are CNC machined and take a 10mm axle. It weighs 821g.
Top cap and spacers are not included. The steerer has no internal thread, you need a star nut, as included with most headsets.
Facts: Elevn Technologies "V2 8.0" BMX Race Fork - 20 Inch - 10mm
- Wheel Size: 20"
- Material: 4130 CrMo, heat treated, steerer with variable wall thickness
- Steerer Tube Diameter: 1-1/8" (28.6mm)
- Steerer Tube Length: 172mm
- Top Bolt: not included, steerer without internal thread (star nut needed)
- Dropouts: CNC machined, 10mm (3/8") axles
- Offset: 31mm
- Recommended for: Race
- Extras: axle to crown 315mm, reinforced for riders over 80kg, for 20" pro frames with a straight 1-1/8" head tube
- Content: 1 fork
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
