Enduro Bearings "BBT-044" Bottom Bracket Cup Socket Kit
-
Weight : 0.16kg / 0.35lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40143
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "BBT-044" Bottom Bracket Cup Socket Kit contains all four splined cups and the bearing inserts to install and remove any Enduro bottom bracket. The 24, 29 and 30 mm inserts and a universal insert snap in and keep the cup straight while tightening; each insert has a 3/8 inch drive for a torque wrench or breaker bar. Made of the same aluminium alloy as the bottom bracket cups so nothing gets marred.
Facts: Enduro Bearings "BBT-044" Bottom Bracket Cup Socket Kit
- Contains: 4 splined cups 52x16, 46x12, 44x16 and 41x16, inserts 24, 29, 30 mm and universal
- Material: 6061-T6 aluminium
- Compatibility:
- 52x16: T47, TorqTite BB386 and PF30
- 46x12: BSA 29 and 30
- 44x16: BSA24 (FC32)
- 41x16: MAXHit BSA24 (FC25) - Extras:
- 3/8 inch square drive on each insert
- Enduro part number BBT-044
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
