Enduro Bearings "BRT-040" Bottom Bracket and Hub Bearing Tool
-
Weight : 0.16kg / 0.35lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40137
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "BRT-040" Bottom Bracket and Hub Bearing Tool gently removes and installs bottom bracket and hub bearings using the rod and nut of an Enduro bearing press (BRT-060 or BRT-050). It is ideal for stainless and XD-15 bearings that can be removed, cleaned and reinstalled when they get rough. The 24, 29 and 30 mm kits contain split collet, expander, guide, extraction cup and master cup; in addition there is the hub kit, single split pullers and the BRT-019 adapter for BSA30/ITA30 cups.
Facts: Enduro Bearings "BRT-040" Bottom Bracket and Hub Bearing Tool
- Contains:
- 24/29/30 mm kit: split collet, expander, bearing and frame guide, extraction cup, 52 mm master cup with 32 mm flats
- 29/30 mm kit: guide 29/42/46 or 30/42/46 mm, the split collet takes 29 and 30 mm bearings
- hub kit: receiver cups for hubs with axle stops
- split pullers: one split expanding puller each
- BRT-019: one adapter - Compatibility: Enduro bearing presses BRT-060 (or BRT-060-MH) and BRT-050; bottom brackets with 24, 29 (DUB) and 30 mm bearings, hubs with axle stops
- Extras:
- version: 24 mm bottom bracket kit (Shimano), 29 mm bottom bracket kit (SRAM DUB), 30 mm bottom bracket kit, BRT-019 adapter BSA30/ITA30/DUB, hub kit (axles with stops), split puller 24/25 mm or split puller 29/30 mm
- BSA29/ITA29 and BSA30/ITA30 threaded cups additionally need the BRT-019 adapter
- the master cup takes the standard nut (15 mm) and the PT-011 zip nut
- the press itself (rod, nut, handles) is not included
- Enduro part numbers: BRT-040-24mm, BRT-040-29mm, BRT-040-30mm, BRT-040-Hub, BRT-040-24, BRT-040-29/30, BRT-019
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
