Enduro Bearings "BRT-058" Linear Headset Press Kit
-
Weight : 0.16kg / 0.35lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40142
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "BRT-058" Linear Headset Press Kit presses headset cups of all sizes straight into the head tube. The 3/8 inch ACME rod with trapezoidal thread pushes at an exact right angle, the static nut runs on a precision thrust bearing and therefore without binding. The handles can be combined long or short, a quick action zip nut saves spinning the nut down, and a full set of guides is included.
Facts: Enduro Bearings "BRT-058" Linear Headset Press Kit
- Contains: press rod 3/8 inch (10 mm) ACME with static nut and thrust bearing, pair of interchangeable Linear Quick handles, 3/8 inch zip nut, set of press guides
- Material: handles 6061 aluminium
- Compatibility: headset cups of all sizes
- Extras:
- handles can be driven by hand, with open end or socket wrenches or a hex key
- Enduro part number BRT-058
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
