Enduro Bearings "HT Outer" Bearing Press Guide
-
Weight : 0.03kg / 0.07lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40139
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "HT Outer" Bearing Press Guide is an outer guide for a bearing press and makes sure the bearing is pressed in straight and only via the correct race. Outer guides push on the outer race and are used when the bearing goes over an axle. This is a single guide; order two for both sides.
Facts: Enduro Bearings "HT Outer" Bearing Press Guide
- Contains: 1 guide (the manufacturer photo shows both sides of the same guide)
- Compatibility: bearing presses with 5/16 inch ACME rod: BRT-060 and the predecessors BRT-005 and BRT-050; bearing size see version
- Extras:
- version: bearing 6000 (12 x 26 mm), bearing 6001 (12 x 28 mm), bearing 608 (8 x 22 mm), bearing 6704 (20 x 27 mm), bearing 6801 (12 x 21 mm), bearing 6802 (15 x 24 mm), bearing 6805 (25 x 37 mm), bearing 6901 (12 x 24 mm), bearing 699 (9 x 20 mm), bearing MR 1526 (15 x 26 mm), bearing MR 1728 (17 x 28 mm), bearing R6 or bearing R8
- versions with -E have an extended inner race guide
- complete sets: BGK-005 (inner) and BGK-004 (outer)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
