Enduro Bearings "Puller" Bearing Puller Collet
-
Weight : 0.08kg / 0.18lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40133
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "Puller" Bearing Puller Collet is a single expanding puller for bearings with the selected inner diameter, as a replacement or addition for Enduro's blind hole puller sets. Depending on size made of heat treated stainless steel or phosphate treated CrMo steel.
Facts: Enduro Bearings "Puller" Bearing Puller Collet
- Contains: 1 puller
- Material: depending on version heat treated stainless steel or heat treated, phosphate treated CrMo steel
- Compatibility: Enduro blind hole puller sets BRT-100 (BBT-100), BBT-200 and BBT-222; bearing inner diameter see version
- Extras:
- version: 10-11 mm CrMo, 12-14 mm stainless, 17-18 mm stainless, 17-19 mm stainless, 20-21 mm stainless, 24-25 mm CrMo, 30-31 mm stainless, 6-7 mm stainless or 8-9 mm CrMo
- Enduro part numbers: TK puller 6-7 SS, TK Puller 8-9 CR-MO, TK puller 10-11 CR-MO, TK puller 12-14mm SS, TK puller 17-18 SS, TK puller 17-19mm SS, TK puller 20-21 SS, TK puller 24-25 CR-MO, TK puller 30-31 SS
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
