Enduro Bearings "XD-15 Double Row BB86/92" MTB Bottom Bracket
- Weight : 0.12kg / 0.26lbs
- Packaging Unit: 1 Set
- Product ID (PID): 43808
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "XD-15 Double Row BB86/92" MTB Bottom Bracket is a press fit solution for BB86/92 frames: double row flanged bearings press directly into the 41 mm shell, so a thick crank spindle fits despite the narrow bore, and twice the number of balls per side gives a long service life. The bearings are ceramic hybrid bearings with XD-15 nitrogen steel races and grade 5 Si3N4 ceramic balls, which according to the manufacturer get smoother with use instead of wearing down. The bottom bracket is available for 30 mm cranks (BB30 spindle) and for SRAM DUB (29 mm); choose the spindle in the variant.
Facts: Enduro Bearings "XD-15 Double Row BB86/92" MTB Bottom Bracket
- Material: ceramic hybrid bearings, XD-15 nitrogen steel races, grade 5 Si3N4 ceramic balls
- Style: press fit BB86/BB92 (41 mm shell bore)
- Axle Diameter: 29mm or 30mm
- Bearings: double row flanged bearings (twice the number of balls per side), pressed directly into the shell
- Distance Tube: center sleeve kit
- Scope of Delivery: 2 double row flanged bearings, center sleeve kit, outer seals, spacers, aluminium preload adjuster; no tools
- Extras:
- manufacturer warranty: BKC-7021 unlimited lifetime on bearings and races, BKC-7022 limited lifetime against wear and corrosion
- the replacement bearings DRF 3041 (30 mm) and DRF 2941 (SRAM DUB) are not sold individually for this kit
- installation tools named by the manufacturer: BRT-060-MH, BRT-040-30MM, BRT-040-29MM, BRT-040-BB86/92
- Enduro part numbers: BKC-7021 (30 mm, BB30 cranks), BKC-7022 (SRAM DUB)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
