GT Bikes "Power Series" BMX Crank
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 1.06kg / 2.34lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 25246
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
This 3-piece
GT Bikes "Power Series" BMX Crank
has a very stable 24mm CrMo 48 spline hollow crank spindle which provides more stability compared to conventional 19mm CrMo crank spindles at almost the same weight. This very high quality crank set is equipped with sprocket holes for regular sprockets (23T and bigger) and Micro Drive sprockets (smaller than 23T) on both crank arms.
Facts: GT Bikes "Power Series" BMX Crank
- Material Crank Arms: 4130 CrMo, heat treated
- Material Crank Spindle: 4130 CrMo, heat treated, hollow
- Crank-Type: 3-piece
- Crank Arm Length: 165mm
- Spindle Diameter: 24mm
- Spindle-Type: 48-Spline
- possible Sprocket Mount by:
Micro-Bolt-Drive (smaller then 25T): right (RHD) and left (LHD)
Bolt-Drive (25T or larger): right (RHD) and left (LHD)
Spline-Drive: right (RHD) and left (LHD) - Pedal Thread: for 9/16" pedals
- Spindle Bolt: 2x bolts (18x1mm, 24mm Axle) with 6mm allen key
- Sprocket Bolt: 1x bolt (10x1.5mm)(Standard)
- Recommended for: Street, Park or Trails
