Halo "EX3 MX Supadrive Disc" Rear Wheel - 20 Inch (406)
- Weight : 0.76kg / 1.68lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43737
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Halo "EX3 MX Supadrive Disc" Rear Wheel - 20 Inch (406) is a ready to ride race rear wheel from Halo's EX3 MX range for lighter riders. The EX3 rim in 406 size has a stiff semi aero section for a fast pickup at the gate. This version is built for disc brakes, the rim is fully anodised. At its core sits the Halo MXR Supadrive Disc hub with IS 6-bolt mount and Shimano HG single speed fitment: three wedge pawls engage 120 teeth, that is 3 degrees to engagement. The hub runs on two 6902 sealed bearings, the driver on one 6902 and one 6802, the axle is 110 mm wide and bolts in with 3/8" bolts. Cog and rotor are not included.
Facts: Halo "EX3 MX Supadrive Disc" Rear Wheel - 20 Inch (406)
- Wheel Size: 20" (406)
- Brake Type: disc, IS 6-bolt
- Rim: Halo EX3 20 x 1.5", fully anodised
- Material: heat treated aluminium - Hub: Halo MXR Supadrive Disc
- Bearing: 2 x 6902 (hub), 6902 and 6802 (driver)
- Driver: Shimano HG single speed fitment, Supadrive with 120 engagement points, 3 wedge pawls - Axle: 110 mm, 3/8" bolts (bolt in)
- Content: 1 rear wheel, without cog and rotor
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
