Halo "Ridge Line II" MTB Rear Wheel - 27.5" Inch
- Weight : 1.22kg / 2.69lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43782
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Halo "Ridge Line II" MTB Rear Wheel - 27.5" Inch is Halo's entry level thru axle wheel for trail and all mountain riding. The Ridge Line double wall rim is 30 mm wide internally and 35 mm externally, suits tyres from 2.25" to 2.8" and is tubeless ready, the hooked bead also lets you run inner tubes. Halo builds it by hand with 32 black J-bend spokes and brass nipples into stainless eyelets. At its heart sits the sealed bearing RL II rear hub with 6-bolt disc mount, CrMo thru axle and a CrMo freehub body with 4 pawls. Pick axle standard and freehub as the version.
Facts: Halo "Ridge Line II" MTB Rear Wheel - 27.5" Inch
- Wheel Size: 27.5"
- Version: 12 x 142 mm / 6-bolt / Shimano Micro Spline, 12 x 148 mm Boost / 6-bolt / Shimano HG, 12 x 148 mm Boost / 6-bolt / Shimano Micro Spline or 12 x 142 mm / 6-bolt / Shimano HG
- Rim: Halo Ridge Line, double wall aluminium with stainless steel eyelets
- Rim Width: 35 mm external, 30 mm internal
- Rim Height: 17.7 mm
- Holes: 32H
- Hub: Halo RL II, 148 x 12 mm Boost or 142 x 12 mm, CrMo thru axle
- Hub Bearings: sealed (SB)
- Spokes: 32, black, plain gauge, J-bend
- Spoke Nipples: brass, black ED coated
- Disc Mount: 6-bolt (IS)
- Scope of Delivery: 1 wheel
- Build: hand built
- Extras:
- tubeless ready, hooked bead, also works with inner tubes
- recommended tyre size 2.25" to 2.8"
- CrMo freehub body, 4 pawls, Shimano HG in 11 speed road length or Micro Spline
- according to Halo the 142 mm version converts to QR 135/141 with an aftermarket kit
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
