Halo "Skelta" MTB Rear Wheel - 29" Inch
- Weight : 1.12kg / 2.47lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43698
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Halo "Skelta" MTB Rear Wheel - 29" Inch is the 29 inch rear wheel of the Skelta range in silver. Halo builds the Skelta rim from heat-treated 6069-T6 aluminium with a seamless welded joint and tested it for over a year, Hardline included. A 30 mm inner width and a hooked profile keep the tyre secure, tubeless or with a tube; the rim is optimised around 2.5" tyres and takes 2.2" up to 2.8". At its centre runs Halo's MT Mantradrive 750 Boost hub for 12 x 148 mm with 150 points of engagement and a CrMo axle, laced with triple-butted J-bend stainless spokes and brass nipples. The freehub takes SRAM XD cassettes and the rotor mounts on the 6-bolt interface.
Facts: Halo "Skelta" MTB Rear Wheel - 29" Inch
- Wheel Size: 29"
- Version: 12 x 148 mm Boost / 6-bolt / SRAM XD
- Rim: Halo Skelta, 6069-T6 aluminium, heat-treated
- Rim Width: 37mm outer, 30mm inner
- Rim Height: 20mm
- Holes: 32H
- Hub: Halo MT Mantradrive 750 Boost, 12 x 148mm Boost
- Hub Bearings: sealed (SB)
- Points of Engagement: 150
- Valve Hole: for Presta valves
- Spokes: stainless steel, silver, triple-butted, J-bend
- Spoke Nipples: brass, silver
- Disc Mount: 6-bolt
- Freehub: SRAM XD, CrMo axle
- Scope of Delivery: 1 wheel
- Extras:
- tubeless ready
- seamless welded rim joint
- hooked rim profile
- optimised for 2.5" tyres, fits 2.2" to 2.8"
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
