Halo "Skelta" MTB Rear Wheel - 26" Inch
- Weight : 1.12kg / 2.47lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 44767
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/halo-skelta-mtb-rear-wheel-26-inch-p-44767
Printed: 10/21/2026
Printed: 10/21/2026
The Halo "Skelta" MTB Rear Wheel - 26" Inch is the 26 inch rear wheel of the Skelta range in black, with a single speed freehub. Halo builds the Skelta rim from heat treated, shot peened 6069-T6 aluminium with a seamless welded joint and tested it for more than a year, including at Hardline. 30 mm internal width and a hooked profile keep the tyre secure, with or without a tube; the rim is optimised for 2.5" tyres and fits 2.2" to 2.8". At its heart runs Halo's MT MantraDrive 750 Boost hub for 12 x 148 mm with 150 points of engagement, sealed cartridge bearings and a Cr-Mo axle, hand built with triple butted J-bend stainless spokes and brass nipples. The Cr-Mo steel freehub takes Shimano HG single speed cogs, the rotor mounts on the 6-bolt interface.
Facts: Halo "Skelta" MTB Rear Wheel - 26" Inch
- Wheel Size: 26"
- Version: 12 x 148 mm Boost / 6-bolt / Shimano HG Single Speed
- Rim: Halo Skelta, 6069-T6 aluminium, heat-treated, shot peened
- Rim Width: 37mm outer, 30mm inner
- Rim Height: 20mm
- Holes: 32H
- Hub: Halo MT MantraDrive 750 Boost, 12 x 148mm Boost, 150 points of engagement, Cr-Mo axle
- Hub Bearings: sealed (SB)
- Spokes: stainless steel, black, triple-butted, J-bend
- Spoke Nipples: brass
- Disc Mount: 6-bolt
- Build: hand built (according to Halo all Halo wheels)
- Scope of Delivery: 1 wheel
- Extras:
- Cr-Mo steel freehub body for Shimano HG single speed cogs
- tubeless ready
- seamless welded rim joint
- hooked rim profile
- optimised for 2.5" tyres, fits 2.2" to 2.8"
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
