Haro Bikes "Lineage Group 1" BMX Crank
-
Weight : 0.85kg / 1.87lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 11320
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Haro Bikes "Lineage Group 1" BMX Crank
is made by 100% 410 CrMo and is compatible for LHD and RHD.
The
Haro Bikes "Lineage Group 1" BMX Crank
has a 19mm thick and heat treated 48-tooth spindle.
Facts: Haro Bikes "Lineage Group 1" BMX Crank
- Material Crank Arms: 4130 CrMo, heat treated
- Material Crank Spindle: 4130 CrMo, heat treated
- Crank-Type: 3-piece
- Crank Arm Length: 175mm
- Spindle Diameter: 19mm
- Spindle-Type: 48-Spline
- possible Sprocket Mount by:
- Micro-Bolt-Drive (smaller then 25T): right (RHD) and left (LHD)
- Bolt-Drive (25T or larger): right (RHD) and left (LHD)
- Spline-Drive: right (RHD) and left (LHD) - Pedal Threat: 9/16"
- Spindle Bolt: 2x bolts (12x1mm, 19mm Axle)
- Sprocket Bolt: 1x bolt (10x1.5mm)(Standard)
- Extras: completely surround welded axle and pedal jacks, rectangular flattened arms
- Recommended for: Street, Park, Trails or Flatland
