KHE Bikes "Samox 32T Direct Mount" MTB Crank Set - 170 mm
-
Weight : 0.68kg / 1.5lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 39278
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The KHE Bikes "Samox 32T Direct Mount" MTB Crank Set - 170 mm is a single-ring crank set with 170 mm aluminium arms and a 32 tooth narrow wide steel chainring that mounts directly to the crank arm without a spider. It runs on a JIS square taper bottom bracket (not included), works with 9 to 12 speed chains and gives a 53 mm chainline with 13 mm offset for Boost rear ends. Black anodised, 680 g.
Facts: KHE Bikes "Samox 32T Direct Mount" MTB Crank Set - 170 mm
- Material Crank Arms: aluminium, black anodised
- Material Crank Spindle: none, for a bottom bracket with JIS square taper spindle (not included)
- Crank-Type: 3-piece
- Crank Arm Length: 170mm
- Spindle-Type: Square taper (JIS)
- possible Sprocket Mount by:
- Direct Mount: 32 tooth narrow wide steel chainring pre-mounted - Pedal Thread: for 9/16" pedals
- Extras: 53 mm chainline, 13 mm offset, for 1/2" x 3/32" and 11/128" chains (9 to 12 speed)
- Contains: 1 crank set (2 crank arms with chainring)
- Recommended for: Trails
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
