Loctite "Freeze & Release" Rust Remover - 400ml
-
Weight : 0.4kg / 0.88lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 34357
Found an error? Report it. 5 EUR voucher if confirmed.
Loctite "Freeze & Release" Rust Remover - 400ml tackles a seized part differently from an ordinary creeping oil: the spray chills the spot down to -43 degrees within seconds. The sudden contraction cracks the rust layer microscopically, and only through those cracks does the lubricant reach the place where the joint is actually stuck. This is the can for the pedal axle that has been sitting in the crank thread for three years, or for a seatpost that will not move. What stays behind is a thin film that guards against fresh corrosion.
Facts: Loctite "Freeze & Release" Rust Remover - 400ml
- Contains: 1 aerosol can, 400 ml
- Applicator: aerosol can with extension tube
- Area of Application: rusted, corroded and seized parts in iron and steel
- Extras:
- freeze shock cools the part down to -43 degrees Celsius
- cracking the rust layer microscopically so the lubricant wicks in by capillary action
- leaves a lubricating film against fresh corrosion
- safe on metal and non corrosive
- ready to use, product code LB 8040
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
