Mutiny Bikes "Cinch" BMX Crank
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 0.84kg / 1.85lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 8696
Found an error? Report it. 5 EUR voucher if confirmed.
This
Mutiny Bikes "Cinch" BMX Crank
comes with a 22mm CrMo hollow spindle and a preinstalled crank arm in 2.5 style. This crank is made in for Mutiny known high production quality and only compatible to splinedrive sprockets. The specially rectangular shaped 175mm long crank arms are heat treated and have no sprocket holes. Thus, this
Mutiny Bikes "Cinch" BMX Crank
is by design lightweight, easy to install and offers together with a splinedrive sprocket a super clean look and by using best 4130 CrMo quality a very high stability.
Attention: This crank is only compatible to splinedrive sprockets with a 22mm hole diameter and optionally available as RHD or LHD version.
Attention: This crank is only compatible to splinedrive sprockets with a 22mm hole diameter and optionally available as RHD or LHD version.
Facts: Mutiny Bikes "Cinch" BMX Crank
- Material: 4130 CrMo, heat treated
- Style: Splinedrive, LHD, 2.5-piece single bolt installation
- Crankarm length: 175mm, without sprocket holes
- Axle: 22mm, CrMo hollow spindle, 48 spline, flush mount 8mm CrMo hex bolts
- Extras: Investment cast oversize spindle bosses, rectangular arms
