Wolf Tooth "Ripsaw" MTB Pedals
-
Weight : 0.38kg / 0.84lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: Pair
- Product ID (PID): 36508
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
Wolf Tooth "Ripsaw" MTB Pedals is the counterpart to the Waveform: instead of concave the big asymmetric platform is slightly convex and only 7mm thin at the leading edge. That suits riders who stand mid-foot on the pedal, with the ball of the foot in front of the axle and the arch over the crown of the pedal. Twelve stainless steel pins per side load from the rear, inside run a 17-4 stainless steel axle, three sealed bearings and an igus bushing behind a radial seal. Machined and assembled in Minnesota.
Facts: Wolf Tooth "Ripsaw" MTB Pedals
- Material:
- Pedal Body: 6061-T6 aluminium
- Axle: 17-4 PH stainless steel
- Pins: 304 stainless steel - Thread Size: 9/16" x 20 tpi
- Bearing: three sealed cartridge bearings and one igus bushing per pedal, radial seal against water and dirt
- Extras:
- 12 pins per side (4.5mm, rear loading), 6 spare pins included
- slightly convex profile, just 7mm thin at the leading edge, for a mid-foot position with the ball of the foot in front of the axle
- asymmetric platform
- spare parts and service guide from the manufacturer (Right to Repair), 5 year warranty - Width: 102mm
- Length: 118mm
- Height: 7mm at the leading edge
- Scope of Delivery: 1 pair of pedals, 6 spare pins
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
