Premium "1948 Combo" BMX Crank + 28T Sprocket
-
Weight : 0.9kg / 1.98lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 11214
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Premium "1948 Combo" BMX Crank + 28T Sprocket
is a stable and classic 3-pc. crank made of 100% heat treated 4130 CrMo with 175mm long crank arms and a 48 spline hollow spindle with a diameter of 19mm. The crank arms of this
Premium "1948 Combo" BMX Crank + 28T Sprocket
have a flattened backside and the areas of the axle and the pedal recording are fully welded around to ensure maximum stability. Sprocket holes for regular, but also small micro drive sprockets on both crank arms offer you here a very stable but also RHD/LHD compatible 3-pc. crank Set. This crank set includes a 28T spline drive CrMo sprocket.
Facts: Premium "1948 Combo" BMX Crank + 28T Sprocket
- Material: 100% 4130 CrMo, heat treated
- Style: 3-pc., RHD or LHD / Splinedrive / two bolt installation
- Crankarm length: 175mm, with sprocket holes for regular sprockets (23T and bigger) and Micro Drive sprockets (smaller than 23T)
- Pedal Threat: For 9/16" inch threat
- Axle: Heat treated 4130 CrMo 19mm hollow spindle, 48 spline, flush mount 8mm CrMo hex bolts, aluminium washers
- Extras: Completely surround welded axle and pedal jacks, flattened arms, including 28T CrMo spline drive sprocket
