Pride Racing "Control V2 EXP" BMX Race Hub Set - blue
- Weight : 0.54kg / 1.19lbs
- Packaging Unit: 1 Set
- Product ID (PID): 28669
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Control V2 EXP" BMX Race Hub Set is a hub set for BMX racing with a front hub and a cassette hub, both CNC-machined from 6061-T6 aluminium and built for disc brakes with an ISO6 mount. The front hub runs on a 10mm axle with 100mm spacing, the rear on a 15mm thru-axle with 110mm spacing; the thru-axle is frame-specific and not included. The 7075-T6 aluminium driver takes Shimano cogs and works with 6 micro-toothed pawls that engage three at a time for 180 points of engagement, giving you a direct pick-up out of the gate and out of corners. Sealed Enduro bearings, 28 spoke holes and a spacer and lock ring kit for chainline adjustment come with the Pride Racing "Control V2 EXP" BMX Race Hub Set, which weighs 506g as a set and is available in red and blue.
Facts: Pride Racing "Control V2 EXP" BMX Race Hub Set
- Scope of Delivery: Front hub + cassette hub (rear hub)
- spacer kit and lock ring for chainline adjustment
- 15mm rear thru-axle not included (frame-specific) - Material Hub Shell: 6061-T6 aluminum, CNC-machined
- disc mount: ISO6 - Holes: 28H
- Front Axle: 10mm (3/8"), Female, 100mm spacing
- Rear Axle: 15mm thru-axle, 110mm spacing
- Bolts: front: steel, 10mm (3/8") inch thread 3/8" x 24, 8mm allen key head (original hub bolt, available as spare part)
- Driver: Shimano standard (cassette freehub), 7075-T6 aluminum
- engagement: 180 points, 6 micro-toothed pawls (engaging 3 by 3) - Bearing: Sealed Bearings (SB)
- front: Enduro 15267 (15x26x7mm)
- rear: Enduro MR18307LLB (18x30x7mm) - Set Weight: 506g (front 137g + rear 369g)
