Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim - flat-black
- Weight : 0.33kg / 0.73lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 31110
- Product safety
- Note carbon rim notice
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim is a carbon rim developed exclusively for BMX racing, built from high-quality Toray T700 carbon and featuring a low-profile design with 30mm height and 30mm width to minimize wind resistance while optimizing vertical and lateral stiffness. With 36 spoke holes, tubeless compatibility, and a recommended spoke tension of 110 kgf, it is engineered for the demands of competitive racing, disc brake use only. If you're looking for a lightweight, aerodynamic, and performance-oriented rim for your race setup, the Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim at 330g is a compelling choice.
Facts: Pride Racing "Gravity Carbon Aero Pro" BMX Race Rim
- Wheel Size: 20"
- Material: Toray T700 Carbon
- Holes: 36H
- Width: 30mm
- Height (Rim Wall): 30mm
- ETRTO ⌀: 406mm
- ERD: 375mm
- Rim Wall: Aero (not compatible with brakes)
- Valve Hole Diameter: Presta
- Spoke Arrangement: Crossed Laced (3-cross only, no radial lacing)
- Extras:
- Tubeless compatible: yes
- Brake: disc brake only (no brake track)
- Recommended spoke tension: 110 kgf
- Tire width: 20x1.40" - 20x1.90"
- Weight according to manufacturer: 330g
- Finish: UD Gloss (JAPR3000) or UD Matt (JAPR3001), water decal under varnish
- For front or rear use
Carbon rim notice
On carbon rims, single layers of the laminate can crack, usually from hard landings or overloading. Such damage from use is not a defect: it is covered neither by the statutory warranty nor by any manufacturer's warranty. A rim with cracked layers should be checked before it is ridden again.
Our recommendation: carbon rims are best suited to experienced, professional use. Front wheel rather than rear, and park, dirt or race rather than street. Land clean and you keep the weight advantage for longer. Worth being aware of.
