Pride Racing "Wave Carbon" BMX Race Rim - 20 Inch - 36H
- Weight : 0.28kg / 0.62lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 28739
- Product safety
- Note carbon rim notice
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Wave Carbon" BMX Race Rim - 20 Inch - 36H is the Pride Racing Wave carbon rim for 20 inch race wheels with a 406 rim diameter, made from Toray T700 carbon. Its profile is very low and wide at 22mm height and 31mm width, the rim weighs 295g according to the manufacturer and is one of the lightest rims in BMX racing. The Wave design carries a square reinforcement at every spoke hole, which allows higher spoke tension and makes the wheel stiffer. The rim has no brake track and is meant for disc brakes only, it is tubeless compatible, the valve hole is drilled for Presta valves, and it fits tires from 20x1.40" to 20x1.85". The 36 spoke holes are approved for 3-cross lacing only, and Pride recommends a spoke tension of 110 kgf.
Facts: Pride Racing "Wave Carbon" BMX Race Rim - 20 Inch - 36H
- Wheel Size: 20"
- Material: Toray T700 Carbon
- Holes: 36H
- Width: 31mm
- Height (Rim Wall): 22mm
- ETRTO ⌀: 406mm
- ERD: 380mm
- Rim Wall: Aero (not compatible with brakes)
- Valve Hole Diameter: Presta
- Spoke Arrangement: Crossed Laced (3-cross only, no radial lacing)
- Extras:
- Square reinforcement at every spoke hole (Wave design)
- Tubeless compatible: yes
- Brake: disc brake only (no brake track)
- Recommended spoke tension: 110 kgf
- Tire width: 20x1.40" - 20x1.85"
- Weight according to manufacturer: 295g
- Finish: UD Gloss White (JAPR3088) or UD Matt White (JAPR3089)
Carbon rim notice
On carbon rims, single layers of the laminate can crack, usually from hard landings or overloading. Such damage from use is not a defect: it is covered neither by the statutory warranty nor by any manufacturer's warranty. A rim with cracked layers should be checked before it is ridden again.
Our recommendation: carbon rims are best suited to experienced, professional use. Front wheel rather than rear, and park, dirt or race rather than street. Land clean and you keep the weight advantage for longer. Worth being aware of.
