SaltPlus "Trapez" Freecoaster
This product is currently sold out. The date of new availability is unknown. Show similar products
-
Weight : 0.45kg / 0.99lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 6080
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
SaltPlus "Trapez" Freecoaster
is a Freecoaster-Cassette hub of the latest generation and is based on the function and the typical attachments of a cassette hub. The driver is equipped with special springs, pawls and interchangeable gap discs which allow you the usage as s Freecoaster hub. The great advantage of this new freecoaster technology is that this hub is lighter and your crank does not rotate when you roll backwards like on conventionally used (driver-cluch) coaster technology but offers you a defined and direct depending gap-setting which is equivalent to a cassette hub. The two supplied plastic gap rings of this
SaltPlus "Trapez" Freecoaster
let you provide a variable adjustment of the gap (Idling phase of the crank until the arrival point). If necessary you can switch these very innovative
SaltPlus "Trapez" Freecoaster
with the supplied springs and pawls to a typically functioning cassette hub . This is what we call innovation in BMX hubs!
Facts: SaltPlus "Trapez" Freecoaster
- Material:
- Shell: 7075-T6 aluminium, 36H
- Axle: Male, CrMo, heat treated, hollow, aluminium cone nuts
- Nuts: 17mm CrMo Nuts - Driver: LHD 9T
- Bearing: Sealed bearings
- Flange Diameter: Drive side: 54mm / Non-Drive Side: 47mm
- Compatible Hubguards: SaltPlus "Trapez" Freecoaster Hubguard - Non Drive Side and SaltPlus "Trapez" Freecoaster Hubguard - Drive Side
- Extras: Supplied with 2 included "Gap" disks for adjusting the crank gap, and 3 pawls and 3 springs, which are used to convert into a Cassette
