Silca "Nickel" Anti-Seize Paste
- Weight : 0.09kg / 0.2lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 37185
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/silca-nickel-anti-seize-paste-p-37185
Printed: 11/03/2026
Printed: 11/03/2026
The Silca "Nickel" Anti-Seize Paste is the nickel based anti-seize for everything that should come apart again later: titanium bolts in aluminium, pedal axles, press fits, carbon on stainless steel. It withstands salt, moisture and galvanic corrosion where lithium grease gives up, and is free from copper, lead, PTFE and PFAS. In a syringe for clean dosing.
Facts: Silca "Nickel" Anti-Seize Paste
- Contains: 1 syringe
- Area of Application: threaded and press-fit assemblies, especially between dissimilar metals: titanium, aluminium, magnesium, carbon, stainless steel
- Extras:
- nickel based, copper-free, lead-free, no PTFE or PFAS
- suitable up to 1426 degrees Celsius
- against seizing, galling and galvanic corrosion
- K factor of 0.14
