Spank "Spoon 28" MTB Front Wheel - 24" Inch
-
Weight : 0.87kg / 1.92lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33233
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Spank "Spoon 28" MTB Front Wheel - 24" Inch is the 24 inch front wheel built around the Spank Spoon 28 rim. It measures 23mm inside at a profile height of 24mm. The rim is built for tubes, Spank does not recommend a tubeless setup here. It is laced 3-cross with 32 spokes. The brake rotor mounts on the 6-bolt interface.
Facts: Spank "Spoon 28" MTB Front Wheel - 24" Inch
- Wheel Size: 24"
- Version: 20 x 110 mm
- Rim: Spank Spoon 28, MGR 6 Series alloy
- Rim Width: 23mm inner, 28mm outer
- Rim Height: 24mm
- Holes: 32H
- Valve Hole: for Schrader valve
- Lacing: 3-cross
- Disc Mount: 6-bolt
- Scope of Delivery: 1 wheel
- Extras:
- not recommended for tubeless
- OohBah inverted inner wall
- ETRTO 507x23
- ERD 474mm++ (Spank measures without the nipple head, add twice the nipple head height)
- recommended tyre width 1.3" to 2.3"
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
