Syndyt "SPP Supersized Pro Carbon Ti Tapered" BMX Race Fork - 20 Inch - 20mm
- Weight : 0.63kg / 1.39lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 45316
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/syndyt-spp-supersized-pro-carbon-ti-tapered-bmx-race-fork-20-inch-20mm-p-45316
Printed: 10/29/2026
Printed: 10/29/2026
The Syndyt "SPP Supersized Pro Carbon Ti Tapered" BMX Race Fork - 20 Inch - 20mm is a carbon race fork by SPP, the parts line of Syndyt, developed with BMX legend Toby Henderson. The Supersized design with larger cross sections and strong shoulders puts the carbon where the biggest loads hit, for more stiffness and tyre clearance.
The legs are high modulus unidirectional carbon fiber, the tapered steerer is ultralight 6Al-4V titanium. Crown and dropouts are cold forged 6061-T6 aluminium, and an internal reinforcement supports the steerer to crown junction. The fork is made for 20" wheels with a 20mm thru axle and frames with an integrated tapered head tube (1-1/8" top, 1.5" bottom); a headset wedge is included.
Facts: Syndyt "SPP Supersized Pro Carbon Ti Tapered" BMX Race Fork - 20 Inch - 20mm
- Wheel Size: 20"
- Material: legs: high modulus unidirectional carbon fiber (vacuum molded), steerer: 6Al-4V titanium, tapered 1-1/8" to 1.5", crown and dropouts: 6061-T6 aluminum, cold forged
- Steerer Tube Diameter: 1-1/8" - 1.5" (28.6mm - 38.1mm)
- Top Bolt: headset wedge included
- Dropouts: 20mm thru axle
- Offset: 32mm
- Recommended for: Race
- Extras: axle to crown 302mm, max. rider weight 115kg (EN 16054 category 2), weight approx. 625g (carbon may vary by +/- 5%), internal butterfly reinforcement at the steerer to crown junction, gloss carbon with molded SPP logos
- Content: 1 fork, headset wedge
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
