Syndyt "SYB 205 Pro" BMX Race Frame
- Weight : 1.81kg / 3.99lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43409
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Syndyt "SYB 205 Pro" BMX Race Frame is a 6061-T6 aluminum BMX race frame with a 20.5" top tube, for 406mm wheels (20 x 1.75") with a B52 bottom bracket shell including adaptors for Euro bottom brackets, a tapered 1-1/8" - 1.5" head tube and 27.2mm seat post. Hydroformed triple butted tubes and oversized tube junctions keep the frame stiff, so your power goes straight into the pedals. The chain tensioners are integrated into the rear end (38mm of adjustment), the dropouts take 10mm, 15mm and 20mm axles, and the matching axle hardware is included. Braking is disc only with a post mount for 140mm rotors, and the rear brake line runs internally.
Facts: Syndyt "SYB 205 Pro" BMX Race Frame
- Wheel Size: 20" (406mm, 20 x 1.75")
- Race Size: Pro
- Material: 6061-T6 aluminum, hydroformed triple butted tubes, oversized tube junctions
- Geometry:
- Top Tube Length (TT): 20.5"
- Rider Area: 21.18"
- Chainstay Length (CS): 14.5"
- Head Tube Length: 120mm
- Head Tube Angle (HA): 74°
- Seat Tube Angle (SA): 72°
- Bottom Bracket Height: 11.25" - Headsets Size: Tapered 1-1/8" - 1.5" (integrated, 42/52mm)
- Seat Clamp: 31.8mm clamp diameter
- Seat Post Diameter: 27.2mm
- Bottom Bracket: B52, adaptors for standard European bottom brackets included (installed with BBT-18 tool, not included)
- Dropouts: 110mm O.L.D. rear hub spacing, for 10mm bolt-on, 15mm and 20mm thru axles, axle hardware for all three included; frame width for 15mm thru axle: 173mm, for 20mm thru axle: 163mm
- Chain Tensioners: integrated, 38mm of adjustment
- Brake Type: disc only, post mount, 140mm rotors only
- Brakemounts: post mount, disc brake only (no V-brake bosses)
- Cable Routing: internal rear brake routing
- Frame Weight: 1810g
- Includes: 1 frame, axle hardware for 10mm, 15mm and 20mm, B52 to Euro bottom bracket adaptors
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
