Unior "120/1" Combination Wrench - Long Type
- Weight : 0.45kg / 0.99lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 38783
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/unior-1201-combination-wrench-long-type-p-38783
Printed: 11/02/2026
Printed: 11/02/2026
The Unior "120/1" Combination Wrench - Long Type is Unior's long combination wrench from the 120/1 range: an open end on one side, an offset ring with LIFE profile on the other, which puts the load on the flats of the nut instead of its corners. Drop forged from premium chrome vanadium steel, entirely hardened and tempered, trivalent chrome plated to ISO 1456:2009, made to ISO 7738. The long type gives more leverage than the short 125/1.
Facts: Unior "120/1" Combination Wrench - Long Type
- Contains: 1 piece
- 6mm: 119mm, 16g
- 7mm: 129mm, 15g
- 8mm: 141mm, 23g
- 9mm: 152mm, 27g
- 10mm: 163mm, 37g
- 11mm: 176mm, 45g
- 12mm: 186mm, 55g
- 13mm: 199mm, 68g
- 14mm: 210mm, 83g
- 15mm: 222mm, 96g
- 16mm: 234mm, 121g
- 17mm: 245mm, 144g
- 18mm: 257mm, 165g
- 19mm: 268mm, 186g
- 20mm: 280mm, 225g
- 21mm: 291mm, 251g
- 22mm: 303mm, 266g
- 24mm: 330mm, 382g
- 27mm: 360mm, 453g
