Unior "1604/2PLUS" Steerer Tube Cutting Guide
- Weight : 0.92kg / 2.03lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43988
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Unior "1604/2PLUS" Steerer Tube Cutting Guide keeps the saw blade straight and square when shortening a steerer tube. The guide block in premium flex plus carbon steel takes 1, 1 1/8, 1 1/4 and 1 1/2 inch steerers and is clamped in the vice. The 1604.1/2PLUS length gauge mounts on the block to set the desired steerer length quickly and precisely before the cut.
Facts: Unior "1604/2PLUS" Steerer Tube Cutting Guide
- Contains: 1 cutting guide with bushings for the four steerer sizes
Material: Premium flex plus carbon steel
Compatibility: 1, 1 1/8, 1 1/4 and 1 1/2 inch steerer tubes
Extras: Mount for the 1604.1/2PLUS length gauge, block 60 x 60 x 38 mm, 918 g
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
