Unior "1728/6" Rotor Wear Indicator
- Weight : 0.06kg / 0.13lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 44001
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Unior "1728/6" Rotor Wear Indicator shows at a glance whether a brake rotor is still thick enough: if the rotor does not fit into the slot, it is within the safe range; if it fits, it has reached its minimum thickness and should be replaced. Six laser cut measuring slots, each marked with the minimum thickness of the common rotor makers. A QR code links to a video guide, a hole is for hanging. The minimum thickness of your rotor is printed on it or given by its maker.
Facts: Unior "1728/6" Rotor Wear Indicator
- Contains: 1 piece
Compatibility: Rotors with minimum thickness 1.5 / 1.55 / 1.7 / 1.8 / 2.0mm and a sixth slot (maker text 2.1mm, marking 2.3mm)
Extras: 6 laser cut measuring slots, QR code to video guide, hanging hole, 55g
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
