Wolf Tooth "Premium" MTB Headset - ZS44/28.6 | ZS56/40 tapered
-
Weight : 0.13kg / 0.29lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 36514
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
Wolf Tooth "Premium" MTB Headset - ZS44/28.6 | ZS56/40 tapered is Wolf Tooth's Premium headset in the limited olive colour: upper and lower machined in Minnesota from 6061 aluminium, with Enduro stainless steel bearings the manufacturer backs with a lifetime warranty. Three seals keep the weather out: an O-ring on the steerer, a lip seal over the upper bearing and a dual lip seal on the crown race. The stem cap has a 5mm spacer built in, the top cover stacks just 6mm. The included star nut is for steel and aluminium steerers only, carbon needs a compression plug.
Facts: Wolf Tooth "Premium" MTB Headset - ZS44/28.6 | ZS56/40 tapered
- Material: 6061 aluminium, CNC machined
- Size: 1-1/8 to 1.5 inch, ZS44/28.6 | ZS56/40, tapered (zero stack, 44mm upper and 56mm lower)
- Bearing: Enduro stainless steel cartridge bearings, sealed
- Scope of Delivery: 1 headset (upper and lower) with bearings, crown race, stem cap with integrated 5mm spacer, aluminium bolt and star nut; no compression plug
- Extras:
- Enduro stainless steel bearings with lifetime manufacturer warranty
- triple sealed: O-ring on the steerer, lip seal on the upper bearing, dual lip seal on the crown race
- 36 x 45 degree bearings
- 6mm top cover stack, stem cap with integrated 5mm spacer
- star nut for steel and aluminium steerers only, cap bolt torque 2-3Nm
- made in USA
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
