Wolf Tooth "T47i" MTB Bottom Bracket
-
Weight : 0.1kg / 0.22lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 39639
- Product safety
The Wolf Tooth "T47i" MTB Bottom Bracket is the Wolf Tooth bottom bracket for T47 internal shells from 85.5 to 92 mm wide, where the bearings sit inside the shell and only the tool flange is outside, machined and assembled in Minnesota. The bearings are an in-house design: balls and races of hardened chrome steel (AISI 52100), harder than stainless and lower in drag, with an ACOSUR ZNA coating that protects against corrosion at least as well as stainless in a 500 hour salt water test; Wolf Tooth backs that with a lifetime warranty. Seals and polymer spindle bushings keep water and mud out and stop creaking, the adjustable inner sleeve covers 85.5 to 92 mm. For 29 mm (SRAM DUB) and 30 mm spindles, installed with the 52-16 tool, in the Wolf Tooth colours.
Facts: Wolf Tooth "T47i" MTB Bottom Bracket
- Material: cups 6061-T6 aluminium, sleeve glass filled nylon, seals NBR/EPDM/urethane, bearings AISI 52100 chrome steel hardened (Rc 60-66) with ACOSUR ZNA coating
- Style: T47 internal (T47i), M47 x 1 thread, bearings inside the shell, tool flange outside
- Axle Diameter: 29mm or 30mm
- Shell Width: 85.5 to 92 mm with the included adjustable sleeve
- Bearings: Wolf Tooth cartridge bearings, hardened chrome steel, ACOSUR ZNA coated, lifetime manufacturer warranty
- Distance Tube: adjustable inner sleeve 85.5-92 mm
- Scope of Delivery: 1 bottom bracket, 2 shell spacers 2.5 mm, spindle spacers (29 mm: 2x 0.5, 2x 1, 3, 5, 7.5 mm; 30 mm: 2x 0.5, 2x 1, 2, 3, 5 mm)
- Extras:
- polymer spindle bushings against creaking
- installation with a 52-16 bottom bracket tool (e.g. Wolf Tooth BBS5216)
- weight 96 g (29 mm) or 91 g (30 mm) without spacers, manufacturer
- replacement parts and service guide from the manufacturer (Right to Repair)
- made in the USA
