Wolf Tooth Tubeless Valves - 44mm - purple
- Weight : 0.01kg / 0.02lbs
- Packaging Unit: Pair
- Product ID (PID): 39704
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/wolf-tooth-tubeless-valves-44mm-p-39704?options={1}83
Printed: 11/05/2026
Printed: 11/05/2026
The Wolf Tooth Tubeless Valves - 44mm are Presta tubeless valves machined from 7075 aluminium in the short 44 mm length for shallow rims, with everything needed for installation: two valves, two machined aluminium caps, two nuts, two spare valve cores, a machined valve core remover and three rubber bases for different rim beds. The stem is slotted at the base for tyre inserts and threaded below the rubber seal so it also seals on single wall rims. The oversized nut tightens and loosens by hand. Fits tubeless rims and tyres drilled for Presta.
Facts: Wolf Tooth Tubeless Valves - 44mm
- Material: Aluminum 7075, anodised
- Valve Type: Presta (SV)
- Valve Length: 44mm
- Compatibility: tubeless rims and tyres, Presta pump heads
- Scope of Delivery: 2 valves, 2 aluminium caps, 2 nuts, 2 spare valve cores, 1 valve core remover, 3 rubber bases (2 cones, one installed, 1 channel)
- Extras:
- slotted base for tyre inserts
- oversized nut for better sealing and easier removal
- stem threaded below the seal for single wall rims
- 4 mm hex
- weight 9 g per pair (manufacturer)
