CEMA "BB386 Interlock" BMX Race Bottom Bracket - SRAM DUB
-
Weight : 0.13kg / 0.29lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 35824
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The CEMA "BB386 Interlock" BMX Race Bottom Bracket - SRAM DUB is a press fit bottom bracket for frames with a BB386 shell (46 mm inner diameter, 86.5 mm wide) and SRAM DUB (28.99 mm) cranks. With the Interlock system both cups are screwed together through the sleeve, which prevents creaking in the press fit shell and stiffens the unit. The bearings come in stainless steel, as SRC ceramic bearings or as coated ceramic bearings of the SG3 series, each with aluminium dust covers.
Facts: CEMA "BB386 Interlock" BMX Race Bottom Bracket - SRAM DUB
- Style: BB386, press fit, Interlock
- Outside diameter: 46 mm (frame inner diameter)
- Shell Width: 86.5 mm
- Axle Diameter: 29mm
- Crank type: SRAM DUB (28.99 mm)
- Bearings: 2 x cartridge bearings, bearing type per variant: Ceramic, Ceramic SG3 Coated or Stainless Steel
- Extras:
- Interlock: both cups are screwed together through the sleeve, against creaking in the press fit shell and for more rigidity
- aluminium dust covers
- active seals: seal discs can be removed for re-greasing
- double O-ring against water entering the frame - Content: 1 bottom bracket
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
