Cyclus Tools Frame Alignment Gauge
- Weight : 1.22kg / 2.69lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 39112
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/cyclus-tools-frame-alignment-gauge-p-39112
Printed: 11/07/2026
Printed: 11/07/2026
Gauge from Cyclus Tools that shows whether a frame is bent or twisted. Cyclus Tools Frame Alignment Gauge is placed against the head tube and the seat tube, the feeler is set to the dropout with the adjusting screw, then the gauge goes onto the other side of the frame. If the feeler sits differently there, the rear end is not symmetrical.
Facts: Cyclus Tools Frame Alignment Gauge
- Contains: 1 frame alignment gauge
- Compatibility: bicycle frames, measured between head tube, seat tube and dropout
- Extras:
- feeler with adjusting screw
- checks rear end symmetry by placing the gauge on both sides of the frame
